Thermoplastic Polyurethane Powder

TPU Hot Melt
Adhesive Powder

Available in various particle sizes and melting points for textile, footwear, and automotive lamination. Strong bonding, soft hand-feel, excellent wash resistance and elasticity.

55–120°C
Melting Range
0–200µm
Particle Size
50+
Washes
25Kg
MOQ
Product

Strong bonding,
soft hand-feel

We are dealing with TPU Hot Melt Adhesive Powder, available in various particle sizes and melting points for textile, footwear, and automotive lamination.

Ideal for heat transfer printing, DTF hot melt powder, fabric-to-fabric bonding, and shoe upper lamination. It melts evenly, does not yellow, and gives high peel strength. Bulk stock available.

Wash ResistantLow Temp MeltingNo YellowingSoft TouchSolvent FreeEco Friendly
Colour
White / Natural
As per requirement
Particle Size
0–80 µm
Fine grade
Particle Size
80–200 µm
Coarse grade
MOQ
25 Kg
Bulk stock available
Melting Point
55–120°C
Range available
Key Features

Why choose
TPU Hot Melt Adhesive Powder

TPU Hot Melt Adhesive Powder is built for strong, soft and durable bonds across textile, footwear and automotive lamination.
01
Strong Adhesion & Elasticity
Delivers a strong bond while keeping the elasticity needed for stretch fabrics and flexing footwear.
02
Soft Touch
No hard feel after bonding, so garments and printed areas keep a soft hand-feel.
03
Wash Resistant
Withstands 50+ washes, suited to apparel, sportswear and workwear where durability matters.
04
Low Temperature Melting
Melting points from 55°C to 120°C are available, so you can match the powder to your substrate and process.
05
No Yellowing
Good aging resistance. Melts evenly and keeps light fabrics and white prints clean over time.
06
Eco-Friendly, Solvent Free
Solvent-free formulation for facilities and end markets with environmental requirements.
Technical Data

Product Specifications

Based on current knowledge and experience. Test samples before production use to confirm suitability for your specific substrate and process.
PropertyValueUnit / Detail
ColourWhite / NaturalColour
Particle Size0–80 / 80–200Micron
Melting Point55 – 120°C (range available)
Wash Resistance50+Washes
MOQ25Kg
StockBulkAvailable
Solvent-Free
Eco Friendly
Make in India
MOQ 25 Kg
Product Range

Copa
Powder

Available in various particle sizes and melting points for textile, footwear, and automotive lamination. Provides strong bonding, soft hand-feel, excellent wash resistance and elasticity. Ideal for heat transfer printing, DTF hot melt powder, fabric-to-fabric bonding, and shoe upper lamination. It melts evenly, no yellowing, and gives high peel strength.

Available in White / Natural colour. Particle size 0–80 micron, 80–200 micron as per application. MOQ 25 Kg. Bulk stock available.

Strong AdhesionSoft TouchWash ResistantLow Temp MeltingNo YellowingEco Friendly
White / Natural
0–80 / 80–200 Micron
MOQ 25 Kg
Bulk Stock
Product Range

Polyamide
Powder

Available in various particle sizes and melting points for textile, footwear, and automotive lamination. Provides strong bonding, soft hand-feel, excellent wash resistance and elasticity. Ideal for heat transfer printing, DTF hot melt powder, fabric-to-fabric bonding, and shoe upper lamination. It melts evenly, no yellowing, and gives high peel strength.

Available in White / Natural colour. Particle size 0–80 micron, 80–200 micron as per application. MOQ 25 Kg. Bulk stock available.

Strong AdhesionSoft Touch50+ Washes55–120°CNo YellowingSolvent Free
White / Natural
0–80 / 80–200 Micron
MOQ 25 Kg
Bulk Stock
01
Strong Adhesion & Elasticity
Delivers a strong bond while keeping the elasticity needed for stretch fabrics and flexing footwear.
02
Soft Touch
No hard feel after bonding, so garments and printed areas keep a soft hand-feel.
03
Wash Resistant
Withstands 50+ washes, suited to apparel, sportswear and workwear where durability matters.
04
Low Temperature Melting
Melting points from 55°C to 120°C are available, so you can match the powder to your substrate and process.
05
No Yellowing
Good aging resistance. Melts evenly and keeps light fabrics and white prints clean over time.
06
Eco-Friendly, Solvent Free
Solvent-free formulation for facilities and end markets with environmental requirements.
Product Range

EMI Shielding Curtain
/ Faraday Cloth Curtain

EMI Shielding Fabric Curtain, also known as Faraday Cloth / Conductive Fabric, for RF & EMF shielding. Made from nickel-copper plated polyester fabric, it provides 60–90 dB shielding effectiveness from 10MHz to 6GHz. It blocks mobile radiation, Wi-Fi, RF signals, and EMI interference.

Ideal for server rooms, EMC testing labs, hospitals, military shelters, and home EMF protection. Available as curtain, roll, or custom stitched with eyelets and Velcro edging for full enclosure. When used as a curtain, it creates a barrier against external electromagnetic waves.

60–90 dBConductive Both SidesIEEE-299 TestedLightweightCorrosion ResistantEasy Installation
01
High Shielding Performance
60dB to 90dB attenuation (99.99% blocking) from 10MHz to 6GHz, tested as per IEEE-299 standard.
02
Conductive Both Sides
Surface resistivity below 0.05 ohm/sq.
03
Lightweight & Flexible
Can be stitched, cut, and hung like a normal curtain.
04
Corrosion Resistant
Nickel layer prevents oxidation.
05
Easy Installation
Available with eyelets, Velcro, or magnetic edging for 100% closure.
06
Copper + Nickel Plated
Pure copper and nickel plated on a polyester base: highly conductive, lightweight, flexible and durable.
PropertyValueUnit / Detail
Shielding Effectiveness60 – 90dB
Frequency Range10MHz – 6GHz99.99% blocking, IEEE-299
Surface Resistivity< 0.05ohm/sq, both sides
MaterialCu + Ni on polyesterNickel-copper plated
FormatCurtain / Roll / CustomEyelets, Velcro or magnetic edging
Application Guide

How to use the powder

01
Choose Particle Size & Melting Point
Select 0–80 micron or 80–200 micron and a melting point between 55°C and 120°C to suit your application.
02
Apply the Powder
Distribute the powder evenly on the print, fabric or substrate surface according to your process, e.g. DTF transfer or lamination.
03
Melt & Bond
Apply heat and pressure at the temperature matched to your chosen grade so the powder melts evenly and bonds.
04
Cool & Test
Let the bond cool, then check peel strength and wash performance on your own substrate before bulk production.
Use Cases

Where TPU Hot Melt Adhesive Powder
is applied

From heat transfer printing to shoe upper lamination, TPU Hot Melt Adhesive Powder delivers a clean, soft, wash-resistant bond.
Heat Transfer Printing
Even-melting powder for durable, soft transfers.
↗
DTF Hot Melt Powder
Strong adhesion and wash resistance for DTF prints.
↗
Fabric-to-Fabric Bonding
Soft, elastic bonds across textiles.
↗
Shoe Upper Lamination
High peel strength that flexes with footwear.
↗
Textile Lamination
Strong bond with a soft hand-feel.
↗
Automotive Lamination
Reliable bonding with good aging resistance.
↗
FAQ

Common questions answered

What particle sizes are available?
+
Particle size 0–80 micron and 80–200 micron, chosen as per your application.
What is the minimum order quantity?
+
MOQ is 25 Kg. Bulk stock is available.
What colours are available?
+
White / Natural colour.
What melting points can I get?
+
A range from 55°C to 120°C is available. Tell us your substrate and process and we will recommend the right one.
Is it suitable for DTF printing?
+
Yes. It is ideal for heat transfer printing and DTF hot melt powder, as well as fabric-to-fabric bonding and shoe upper lamination.
Do you also supply Copa powder, polyamide powder and EMI shielding curtains?
+
Yes. See the Copa Powder, Polyamide Powder and EMI Shielding Curtain sections on this page, or contact us with your requirement.

Find the right powder
for your process

Particle sizes of 0–80 and 80–200 micron, melting points from 55°C to 120°C, MOQ 25 Kg. Tell us your application and we will confirm the right grade.

Solvent-Free
Eco Friendly
Make in India
MOQ 25 Kg
Premnath +91 90808 72036
Hariharan +91 83444 56565
ragothaman@gold-chamois-925398.hostingersite.com